Filter
Top Products
90
External flash (optional)
5
Flash
Using a slave flash mode
This setting is for using a commercially available slave flash.
This lets you adjust and fix the amount of light emitted by the commercially
available slave flash. If you set a low amount, the flash will fire during
sequential shooting. The following restrictions apply to the slave flash mode
depending on the selected flash mode.
: The setting is changed to AUTO.
SLOW : The setting is changed to SLOW 1.
1
In the top menu, select MODE
MENU
→
→→
→
CAMERA
→
→→
→
FLASH
→
→→
→
SLAVE, and press .
“How to use the menus” (P.70)
2
Press to select the amount
of light from 1 to 10, then press .
Mode dial
Arrow pad
OK button