Filter
Top Products
209
Troubleshooting
11
Miscellaneous
The viewfinder display is not clear.
Possible cause Corrective action Ref. Page
The diopter is not adjusted
properly.
Adjust the diopter so that the AF target
mark is clearly visible.
P.38
The monitor is hard to see.
Possible cause Corrective action Ref. Page
The brightness is not
adjusted properly.
Select in the mode menu and adjust
the brightness.
P.180
The monitor is exposed to
direct sunlight.
Position the monitor in the down position or
block the sunlight with your hand.
—
Pictures you have taken do not appear on the monitor.
Possible cause Corrective action Ref. Page
The power is off. Set the mode dial to , then turn the
power on.
P.53
The camera is in the shooting
mode.
Press twice quickly, or set the mode
dial to .
P.53, 54
There are no pictures on the
card.
NO PICTURE appears on the monitor.
Record pictures.
—
There is a problem with the
card.
Refer to “Error codes”. P.205
The camera is connected to a
TV.
The monitor does not function when the AV
cable is connected to the camera.
P.151
The date recorded with the image data is wrong.
Possible cause Corrective action Ref. Page
The date/time is not set. Set the date/time. The clock adjustment is
not factory-preset.
P.36
The batteries are exhausted. When the batteries run out, the date/time
setting is canceled or becomes inaccurate.
Replace the batteries with new ones and
set the date/time again.
P.21, 36
The camera has been left
with the batteries removed.
If the camera is left for several hours with
the batteries removed, the date/time setting
is canceled. Set the date/time again.
P.21, 36