Olympus C-5050ZOOM Digital Camera User Manual


 
117
Panorama shooting
6
Advanced shooting
3
Make sure that the edges of the pictures overlap, then take
pictures.
Focus, exposure and white balance are set by the first picture. Do not
select an extremely bright subject (such as the sun) for the first picture.
You cannot adjust the zoom after the first picture.
Panorama shooting is possible for up to 10 pictures.
When you have taken 10 pictures, a
warning mark appears.
4
Press to finish panorama shooting.
The frame on the screen disappears and the camera returns to the
normal shooting mode.
The panorama mode is only available with Olympus CAMEDIA-
brand cards.
Your computer’s memory may be insufficient if you take too many
panorama pictures in HQ or SHQ mode. You are recommended to
use SQ mode for panorama shooting.
During panorama shooting, the flash and sequential shooting are
not available.
Images are saved in JPEG format when panorama shooting is done
in the TIFF mode. The size of the image does not change.
When shooting, make sure that the edges (right/left/top/bottom) of the
images overlap, so that you will know which pictures should be
connected.
Note