Filter
Top Products
– 10 –
:
Lens locking lever
After the lens has been attached to the lens
mount, this lever is tightened up to lock the lens in
position.
;
Lens mount (bayonet type)
This attaches the lens.
<
LENS connector (12-pin)
The connecting cord of the lens is connected
here. For a detailed description of the lens to be
used, read the instruction manual which
accompanies the lens.
=
AUTO W/B (WHITE/BLACK) BAL switch
AWB: The white balance and black balance are
automatically adjusted. When the white
balance selector switch is set to the
MEMO position and then the AUTO W/B
BAL switch is operated, the adjustment
value is stored in the unit’s memory. Bear
in mind that no operation results when the
selector switch is set to the ATW or PRST
position.
>
VTR START/STOP button
This is used to start or stop the recording.
?
TALLY lamp
This lights when the image shot by the camera is
being recorded by the VTR. It lights or flashes in
tandem with the TALLY lamp inside the
viewfinder.
@
Microphone
This is a compact unidirectional microphone. A
microphone with sharp directionality can be
attached by replacing the microphone provided
with the optional holder.
A
Accessory hole
A video light or other accessory is installed here.
B
Viewfinder locking ring
This is used to attach or remove the viewfinder.
When the ring is loosened, the viewfinder can be
rotated by 90 degrees and pointed upward.
C
Eye cup
D
Eye cup unlocking lever
This is used to remove the eye cup. The eye cup
is removed by moving the lever in the direction of
the arrow and then sliding the eye cup free.
E
Viewfinder locking stopper
This is used to adjust the viewfinder’s position. To
adjust the position, loosen the stopper and move
the viewfinder to the left or right. After having
adjusted the position, tighten up the stopper to
lock the viewfinder in place.
F
Shoulder belt fitting
The shoulder belt is fastened here.
G
Diopter control (bottom panel)
Adjust this to match your eyesight so that you can
clearly see the images inside the viewfinder.
H
Eyepiece position adjustment ring
This enables the eyepiece position to be adjusted
forward or backward when used in the unlocked
status. Upon completion of the adjustment, set it
to the LOCK status to lock the eyepiece in
position.
I
Cassette holder
This is the slot where the cassette tape is loaded.