Filter
Top Products
– 7 –
Parts and their functions
1
GAIN selector switch
When the camera picture is too dark, increase the
gain to brighten the picture by setting this switch.
0dB: The switch is normally kept at this
position.
6/9dB: The gain of the camera’s video amplifier
is increased at this position. Select 6 dB
or 9 dB on the on-screen menu first. For
further details, refer to the menu items
(on pages 48, 49 and 53).
12/18dB: The gain of the camera’s video amplifier
is increased at this position. Select 12
dB or 18 dB on the on-screen menu first.
For further details, refer to the menu
items (on pages 48, 49 and 53).
The amount of noise also increases when the gain
is increased.
2
White balance selector switch
MEMO: When the AUTO W/B (WHITE/BLACK)
BAL switch on the front panel is
operated, the white balance is adjusted
automatically, and the adjustment value
is stored in the internal memory.
PRST: Although the preset mode was set to
INDOOR when the unit was shipped
from the manufacturing plant, there is a
choice between three settings altogether
on the on-screen menu. For further
details, refer to the menu items (on
pages 48, 49 and 53).
OUTDOOR
5000K
INDOOR
3200K
FLUOR
4500K
1
234 5
6
7
8
9
@
;
=>
< :
ATW: This is the automatic tracking white
balance mode.
Note:
It may not be possible to attain the correct
white balance under some types of lighting .
?
A