Filter
Top Products
When using a battery pack made by Anton/Bauer
1
Attach the battery pack made by Anton/Bauer.
Power output connector for light
Battery pack made by Anton/Bauer
Before using the battery pack, charge it using the special battery charger made by Anton/Bauer. For the
charging time and other details, refer to the operating instructions of the battery charger used.
Light control switch
Insert it in the direction indicated by the arrow and slide it into place.
$
Provided on the battery holder made by Anton/Bauer are a power
output connector for a light and a light control switch. A light can be
easily attached. For details on lighting systems, consult an
Anton/Bauer representative.
2
Set menu item 7. BATTERY (BATT.SELECT) to the battery which is to
be used.
For further details, refer to the menu items (pages 48 to 50).
Remarks:
$
To remove the battery pack
While holding the unlocking lever on the battery holder all the way
down, slide the battery pack in the direction indicated by the arrow.
Unlocking lever
– 21 –