Filter
Top Products
– 62 –
Troubleshooting
If you suspect trouble in your unit, proceed with the inspections or adjustments described below. Consult your
dealer if the trouble persists even after you have taken the remedial action suggested.
Symptom
Reference
page no.
Inspection/adjustment
O
The power fails to come on.
O
Check if the battery still has a sufficient charge.
O
Check if the AC adaptor has been connected securely.
O
The low battery warning is
given (BATT LED or TALLY
LED lights or flashes).
15 50
O
Check if the battery still has a sufficient charge.
O
Check if the battery setting menu item has been set
correctly. If the AC adaptor is being used, use the NiCd12
setting for the battery selection menu item.
O
The “BACKUP BATTERY
EMPTY” message appears
when the power is turned on.
O
The real time is not correct.
16 58
O
The back-up battery may have reached the end of its
service life (approx. 1 year). Consult with your dealer and
replace it with a new one.
O
No operation results when the
function buttons are pressed.
16 17
O
Check the viewfinder for error messages.
O
The tape cannot be fast
forwarded or rewound.
O
Check if the tape has already been fast forwarded or
rewound all the way to the end or beginning of the tape.