Filter
Top Products
– 14 –
:
Iris ring
To adjust the iris, set the lens iris selector switch
(IRIS) to M, and turn this ring.
;
Flange back adjustment ring
To adjust the flange back, loosen the flange back
locking knob, and turn this ring. The ring must be
adjusted when the lens has been replaced or
when a lens has been mounted for the first time.
<
Macro ring
To take close-ups, set the lens all the way to the
wide position, and turn this ring.
=
Flange back locking knob
Use this knob to lock the flange back after it has
been adjusted.
>
Power/manual zoom selector switch
When this switch is set to SERVO, the zoom can
be adjusted using the power zoom control switch.
When it is set to MANU, the zoom can be adjusted
using the zoom ring.
Also refer to the operating instructions accompanying the lens you have purchased.