Filter
Top Products
133 (E)
Specifications
[VTR UNIT] [Connector Section]
VTR Tape Transport System
Tape used:
1/4-inch DVCPRO L-size cassette tape
Tape speed:
135.28 mm/sec. (59.94 Hz)
135.4154 mm/sec. (60.00 Hz)
Recording/playback time:
46 minutes (using AJ-HP46LP)
32 minutes (using AJ-HP32LP)
FF/REW time:
Approx. 3 minutes (using AJ-HP46LP)
VTR Video System
Sampling frequency:
Y:74.1758 MHz (59.94 Hz)
74.25 MHz (60.00 Hz)
P
B
/P
R
: 37.0879 MHz (59.94 Hz)
37.125 MHz (60.00 Hz)
Quantizing:
8 bits
Video compression system:
DCT + variable-length code
Video compression ratio:
1/6.7
Error correction:
Reed-Solomon product code
Video recording bit rate:
100 Mbps
Video band:
Y:20 MHz
P
B
/P
R
: 10 MHz
VTR Audio System
(during playback on standard player)
Sampling frequency:
48.0 kHz (59.94 Hz)
48.048 kHz (60.00 Hz)
synchronized with video
Quantizing:
16 bits
Frequency response:
20 Hz to 20 kHz ±1.0 dB (at reference level)
Dynamic range:
More than 85 dB (at 1 kHz, AWTD)
Distortion:
Less than 0.1% (at 1 kHz, reference level)
Wow and flutter:
Below measurable limits
Head room:
18 dB
Input
MIC IN (XLR, 3-pin female):
–40 dBu (switchable to –50 dBu using internal
switch)
Phantom +48 V supported
AUDIO IN CH1/CH2 (XLRa2, 3-pin female):
LINE/MIC/MIC+48V switching type
LINE : 0 dBu
MIC : –60 dBu
MIC+48V: Phantom +48V, –60 dBu
GENLOCK IN (BNC):
1.0 V [p-p] (tri-level sync pulse: ±300 mV), 75 Ω
Compliant with SMPTE296M (analogue sync)
standard
TC IN (BNC):
0.5 V—8 V [p-p], high impedance
Output
AUDIO OUT (XLR, 5-pin male):
0 dBu
PHONES:
Stereo mini jack
HD SDI OUT (BNCa2):
0.8 V [p-p], with switch function
TC OUT (BNC):
2.0 V [p-p], low impedance
Other
LENS (12-pin)
ECU (6-pin)
DC IN (XLR, 4-pin male):
DC 12 V (DC 11 V—17 V)
DC OUT (4-pin):
DC 12 V (DC 11 V—17 V), 0.4 A (max.)
EVF (20-pin)