Filter
Top Products
30 (E)
Adjusting the white shading
Select the file No.
Give a title to the selected file.
14
Turn the JOG dial button to move the arrow
(cursor) to the “TITLE : ” item.
< WHITE SHADING >
SELECT :1
READ
DETECTION(V SAW)
CORRECT :ON
n
TITLE:
1:5:
2:6:
3:7:
4:8:
15
When the JOG dial button is pressed, the arrow
(cursor) moves to the title input area, and the
input mode is established.
< WHITE SHADING >
SELECT :1
READ
DETECTION(V SAW)
CORRECT :ON
m
TITLE:
1:5:
2:6:
3:7:
4:8:
19
When the title has been input, turn the JOG dial
button to move the arrow (cursor) to the “:”
position.
< WHITE SHADING >
SELECT :1
READ
DETECTION(V SAW)
CORRECT :ON
m
TITLE:
222222222222
1:5:
2:6:
3:7:
4:8:
20
When the JOG dial button is pressed, the arrow
(cursor) returns to the TITLE: item.
< WHITE SHADING >
SELECT :1
READ
DETECTION(V SAW)
CORRECT :ON
n
TITLE:
222222222222
1:5:
2:6:
3:7:
4:8:
21
Press the MENU button twice to close the menu
screen.
11
Turn the JOG dial button to move the arrow
(cursor) to the SELECT item
13
Press the JOG dial button to enter the file
number.
12
Press the JOG dial button and the file number
will flash. Turn the JOG dial button to select the
file (1 to 8) to be recorded.
< WHITE SHADING >
n
SELECT :1
READ
DETECTION(V SAW)
CORRECT :ON
TITLE:
1:5:
2:6:
3:7:
4:8:
16
Press the JOG dial button again and turn it until
the character to be set is displayed.
When the button is turned, the character
displayed is switched in the following sequence:
Space: )
7
letters: A—Z
7
numbers: 0—9
7
symbols: ’, >, <, /, –, . , x
17
Press the JOG dial button to enter the character.
18
Turn the JOG dial button to move the arrow
(cursor) to the next position (right), and repeat
steps 16 and 17 to set the characters
(maximum of 12).