Filter
Top Products
40 (E)
Attaching the shoulder strap
1
Attach the shoulder strap to the shoulder strap
mounting hooks, and adjust the length of the strap.
<Note>
Check that the shoulder strap is securely fastened.
Shoulder strap
The clip opens
when it is
pressed here.
The clip opens when it
is pressed here.
To detach the shoulder strap, open the clips on the
mounting parts and detach.
Adjusting the shoulder pad position
1
Loosen the two screws.
2
Slide the shoulder pad either backward or forward,
and find the optimum position.
3
Tighten the screws to secure the shoulder pad.
The shoulder pad can be slid up to 15 mm either
backward or forward from the centre position (factory
setting).
Adjust the pad’s position to operate the unit with the
optimum ease.
Shoulder pad
Screws
Bottom section
2
1•3
<Note>
This mounting hook is for attaching the tape measure
that is used to measure the subject distance.
It is not to be used for the shoulder strap.