Filter
Top Products
33 (E)
Adjusting the viewfinder (The viewfinder is an optional accessory.)
Attaching the viewfinder
1
Check that the camera’s POWER switch is at OFF.
2
Connect the plug to the viewfinder connecting
terminal.
<Note>
When connecting the plug to the viewfinder
connecting terminal, push the plug firmly into
place.
3
Push the viewfinder down.
4
Tighten the stopper screw firmly.
Detaching the viewfinder
1
Check that the camera’s POWER switch is at OFF.
2
Loosen the stopper screw, pull the viewfinder
straight up, and draw it out.
<Note>
Use both hands to draw the viewfinder out. It may
not be possible to remove the viewfinder smoothly
with one hand, which may cause damage to it.
3
Disconnect the plug from the viewfinder connecting
terminal.
Stopper screw
Stopper screw