Filter
Top Products
25 (E)
Power supply
Using the Sony NP-1/BP-90 battery
pack
Attach the Sony battery holder. As shown in the
figure, attach the battery case with the cover detached
and then the detached cover.
1Tighten the mounting screws.
2Tighten the power contact screws.
3Insert the top of the detached cover in the direction
shown by the arrows.
4Align the holes in the bottom of the cover (metal
part) with the holes at the bottom of the case, and
use the screws to attach the case.
<Note>
When mounting the battery holder, take care not to
pinch the connecting cord.
Using the V-mount type battery
pack
1
3
4
2
Battery case for NP-1
Battery case for BP-90
2
1
3
4
Attach the V-mount adapter plate.
Insert it in the direction shown by the arrows, and slide
it into place.
Please consult your local dealer for any questions
regarding the NP/BP adapter plate or V-mount
adapter plate.