Filter
Top Products
98 (E)
Setting menu screens FILM (CAM) MAIN MENU 1
SKIN TONE DTL screen
The skin tone detail of the camera is set on this
screen.
Item
Variable
range
Remarks
SKIN TONE DTL ON
OFF
VF
display
USER
ENG
For setting the skin tone
detail to ON or OFF.
SKIN TONE
ZEBRA
ON
OFF
USER
ENG
For setting zebra in the
skin tone range to ON or
OFF.
At the “ON” setting, the
amount of detail in the
zebra viewing range is
varied.
SKIN DTL
CORING
0
:
5
:
7
USER
ENG
For setting detail signal
noise removal level.
Y MAX 0
:
190
:
255
ENG For setting the maximum
luminance level at which
the detail is boosted.
Y MIN 0
:
10
:
255
ENG For setting the minimum
luminance level at which
the detail is boosted.
I CENTER 0
:
55
:
255
ENG For setting the medium I-
axis level at which the
detail is boosted.
I WIDTH 0
:
90
:
255
ENG For setting the minimum I-
axis level at which the
detail is boosted.
Q WIDTH 0
:
10
:
255
ENG For setting the maximum
Q-axis level at which the
detail is boosted.
Q PHASE –31
:
0
:
+31
ENG For setting the minimum
Q-axis level at which the
detail is boosted.
The underlining in the variable range column indicates the setting in
the preset mode.
KNEE/LEVEL screen
The knee settings of the camera are performed on this
screen.
Item
Variable
range
Remarks
MASTER PED
(FILM MENU)
(CAM MENU)
–200
:
0
:
+018
:
+200
VF
display
USER
ENG
For setting the master
pedestal level (MASTER
PED).
MANUAL KNEE ON
OFF
USER
ENG
For setting the mode when
the AUTO KNEE switch is
at OFF.
KNEE POINT
(FILM MENU)
30%
:
65%
:
90%
USER
ENG
For setting the manual
knee point position.
<Note>
This setting is cancelled
when FILM REC has been
selected as the CINE
GAMMA SEL item setting
on the GAMMA screen.
(CAM MENU) 80%
:
95%
:
107%
KNEE SLOPE
(FILM MENU)
150%
:
500%
:
600%
USER
ENG
For setting the manual
knee slope.
<Note>
This setting is cancelled
when FILM REC has been
selected as the CINE
GAMMA SEL item setting
on the GAMMA screen.
(CAM MENU) 0
:
50
:
99
WHITE CLIP ON
OFF
USER
ENG
For setting white clipping
to ON or OFF.
WHITE CLIP LVL 90%
:
109%
USER
ENG
For setting the white
clipping level.
A. KNEE POINT
(CAM MENU)
(FILM MENU)
80%
:
95%
:
100%
:
107%
USER
ENG
For setting the auto knee
point position.
<Note>
The gamma characteristics are set using the KNEE POINT and
KNEE SLOPE items when VIDEO REC was selected as the CINE
GAMMA SEL item setting on the GAMMA screen.
A. KNEE LVL 100
:
108
109
USER
ENG
For setting the maximum
auto knee level.
A. KNEE
RESPONSE
1
2
3
4
USER
ENG
For setting the AUTO
KNEE response rate.