Filter
Top Products
-14-
•
Connection to Intranet (Type 2)
A switching hub connected to the intranet is placed
between the camera and the PC.
Necessaries:
• Straight-type network cable (Category 5)
• Switching hub or router (for 10BASE-T/100BASE-
TX)
• Connection to Internet (Type 3)
The PC accesses the camera through the Internet and
the DSL/CATV modem.
Necessaries:
• Straight-type network cable (Category 5)
• CATV modem (cable modem) or DSL modem
•
Connection to Internet (Type 4)
A switching hub or a router may be added to a type 3
connection.
Network Cable
(Straight type)
(16 clients maximum)
Switching Hub
PC
Network Cable
(Straight type)
Internet
DSL/CATV Modem
PC
(16 clients maximum)
Switching Hub or Router
PC
(16 clients maximum)
Network Cable
(Straight type)
Internet
DSL/CATV Modem
Necessaries:
• Straight-type network cable (Category 5)
• CATV modem (cable modem) or DSL modem
• Switching hub or router (for 10BASE-T/100BASE-
TX)
Notes:
• Setting the router is required when connecting
more than one camera. Refer to the manual includ-
ed with the router.
• The camera does not support PPPoE. Use a router
that handles PPPoE when connecting the camera
using that protocol.
•A global-type IP address is required when con-
necting via the Internet.