Filter
Top Products
-57-
■ Reviewing Alarm Pictures
The alarm pictures stored in the camera can be
reviewed on the PC.
1. In the main window, click the [Alarm List] button.
2. Click the pertinent Data/Time in the list.
You can confirm the pictures of past alarm events.
Type TRM1: Alarm through Terminal 1
TRM2: Alarm through Terminal 2
VMD: Alarm through Video Motion
Detector
1: One alarm event picture attached
: More than one alarm event pic-
ture attached
3. The selected picture is displayed, and the alarm
image control panel appears at the bottom of the
screen. The title of the control panel is followed by
a fraction indicating the number of the displayed
picture and the total number of pictures for the
event.
4. Use the buttons to flip over the Alarm event picture
pages.
FIRST FRAME: Displays the first alarm event pic-
ture.
PREVIOUS: Displays the previous alarm event pic-
ture.
ALARM FRAME: Displays the number of pictures
recorded.
NEXT: Display the next alarm event picture
LAST FRAME: Skips to the latest alarm event.
5. Click the [Go to Main Menu] button to go back to
the main window.
Notes:
• You may need to click the "Reload" button of the
browser when the selected picture does not
appear due to a newly arisen event that replaces
the picture data.
• You may need to re-enter the camera address into
the address bar of the browser when the buttons
do not work properly.
• Re-enter the camera address into the address bar
and start again from step 1, when the selected pic-
ture does not appear though the event is followed
by the icon in the list.