Filter
Top Products
-35-
3. Panning starting point and panning endpoint
Follow the steps below.
(1) Move the cursor to POSITION and press the
CAM (SET) key. The cursor moves to START.
(2) Move the joystick to the right or left to select a
panning starting point and press the CAM
(SET) key.
This determines the starting point and the cur-
sor moves to END.
(3) Move the joystick to the right or left to select a
panning endpoint and press the CAM (SET)
key.
This determines the endpoint, and the cursor
moves to POSITION.
4. Panning speed
The panning speed increases when the joystick is
moved to the right, and decreases when it is
moved to the left.
Notes:
• If the panning range is changed after the camera
has not panned for a long time or has been pan-
ning in the same panning range, the picture may
not be clear or noise may appear. In this case, pan
the camera fully several times.
If this does not eliminate the problem, refer servic-
ing to qualified service personnel.
• When you press the CAM (SET) key, the camera
might move slightly to memorize the nearest pan-
ning/tilting position.
5. Pan limit ON/OFF
The factory default setting is OFF.
ON: Manual pan is limited from the starting point to
the endpoint specified by position setting. Set
ENDLESS to OFF before setting PAN LIMIT to
ON.
OFF: Manual pan is not limited.
Note: When ON is selected for PAN LIMIT, manual
pan moves the camera away from the other
side (PAN LIMIT) of the start-end range.
6. ENDLESS to ON/OFF
The factory default setting is OFF.
ON: The camera pans from the starting point to the
endpoint, and keeps rotating in the same
direction to return to the starting point. Set
PAN LIMIT to OFF before setting ENDLESS to
ON.
OFF: The camera pans from the starting point to
the endpoint, and rotates backward to the
starting point.
This movement is repeated over and over.
7. Dwell time
The factory default setting is 2S.
Dwell time changes as follows:
** AUTO PAN **
POSITION START
END
SPEED ••••|••••
L H
PAN LIMIT OFF
ENDLESS OFF
DWELL TIME 2S
RET
** AUTO PAN **
POSITION START
END
SPEED ••••|••••
L H
PAN LIMIT OFF
ENDLESS OFF
DWELL TIME 2S
RET
** AUTO PAN **
POSITION START
END
SPEED ••••|••••
L H
PAN LIMIT OFF
ENDLESS OFF
DWELL TIME 2S
RET
** AUTO PAN **
POSITION START
END
SPEED ••••|••••
L H
PAN LIMIT OFF
ENDLESS OFF
DWELL TIME 2S
RET
Camera
Endpoint
Starting point
Start-end
range of
auto pan
Self-end
range of
pan limit
** AUTO PAN **
POSITION
SPEED
PAN LIMIT
ENDLESS
DWELL TIME
RET
START
END
••••|••••
L H
OFF
ON
2S