Filter
Top Products
-44-
(7) To Restore the Camera Default Position
(REFRESH)
Move the cursor to REFRESH by using the joystick
and press the [F2] button of the WV-CU550CJ.
For the WV-RM70, WV-CU360CJ or WV-CU161C,
keep pressing the Right and Left switches simulta-
neously for 2 seconds or more.
(8) Camera Resetting (CAMERA RESET)
Move the cursor to CAMERA RESET by using the
joystick and press the [F3] button of the WV-
CU550CJ.
The camera is reset to the factory settings.
For the WV-RM70, keep pressing the Right, Left
and Set switches simultaneously for 2 seconds or
more. For the WV-CU360CJ or WV-CU161C, keep
pressing the Right and Left switches and the
numeric button 5 simultaneously for 2 seconds or
more.
(9) To Close the SPECIAL Menu
Move the cursor to RET and press the CAM (SET)
key.
The setup menu appears on the monitor screen.
Reset to the Factory Default Settings
Any of the above settings plus the ALC/MANUAL level
control and phase adjustments can be reset to the fac-
tory default settings by placing the cursor over the
desired mode and then pressing the [F2] button of the
WV-CU550CJ. For the WV-RM70, keep pressing the
Right and Left switches simultaneously for 2 seconds or
more.
** SPECIAL **
CHROMA GAIN ••••
|
••••
AP GAIN •••
|
•••••
PEDESTAL •••
|
•••••
HUE •I•••••••
– +
DNR LOW
DEMO MODE OFF
REFRESH
→
PUSH SET
CAMERA RESET
→
PUSH SET
RET
** SPECIAL **
CHROMA GAIN ••••
|
••••
AP GAIN •••
|
•••••
PEDESTAL •••
|
•••••
HUE •I•••••••
– +
DNR LOW
DEMO MODE OFF
REFRESH
→
PUSH SET
CAMERA RESET
→
PUSH SET
RET
** SPECIAL **
CHROMA GAIN ••••
|
••••
AP GAIN •••
|
•••••
PEDESTAL •••
|
•••••
HUE •I•••••••
– +
DNR LOW
DEMO MODE OFF
REFRESH
→
PUSH SET
CAMERA RESET
→
PUSH SET
RET