Filter
Top Products
-30-
The following setting procedures are described on the
assumption that this model is used in combination with
the WJ-SX550C Matrix Switcher and WV-CU550CJ
System Controller. In case a controller other than the
WV-CU550CJ is used, refer to the table on page 29.
■ Menu Display
● Setup Menu Display
WV-CU550CJ
1. Select the camera number you want to set up and
a monitor to display the SET UP MENU.
2. Display the D4 menu on the LCD by pressing the
appropriate cursor buttons.
3. Press the [F1] button.
SET UP MENU appears on the monitor screen.
4. To close the SET UP MENU, press the [F4] button.
WV-CU360CJ
Press the CAM SETUP key while holding down the
SHIFT key to open the SETUP menu.
WV-CU161C
Press the CAMERA SETUP key for 2 seconds or
more to open the SETUP menu.
WV-RM70
1. Turn the MODE SELECTION switch to NORMAL or
ALARM OFF.
2. Press the PROG switch for 2 seconds or more to
open the Program Menu.
3. Move the cursor to Camera Set Up Menu, and
press the SET switch to open the SETUP MENU.
● Submenu Display
The items marked O can be selected/changed on the
submenu.
• Move the cursor to an item with the O mark and
press the CAM (SET) key. The submenu appears.
■ Presetting
● Preset Menu Display
1. Displaying the preset menu directly
(1) Move the cursor to PRESET 1 O and select
the position number by moving the joystick to
the right or left.
(2) Press the CAM (SET) key.
The preset setting menu appears on the moni-
tor screen.
2. Displaying the preset menu from the PRESET
NUMBER SET menu
(1) Move the cursor to MAP O and press the
CAM (SET) key.
The PRESET NUMBER SET menu appears on
the monitor screen.
(2) Move the cursor to the position number to be
set and press the CAM (SET) key.
The preset setting menu appears on the moni-
tor screen.
Notes:
• The * mark indicates that the position number
has been preset.
• The character H refers to the home position.
• On the second bottom line, the preset ID
appears respective to the selected number.
"DOOR" next to "ID" in the example shown right
is for preset position number 1.
SETTING PROCEDURES
F1
F1 F2 F3 F4
Camera Set Up Menu
Res A.Res Exit
F2 F3 F4
Camera Set Up Menu
On Exit
** SET UP MENU **
PRESET 1
O
MAP O
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF
FLIP-A-CHIP OFF
CLEANING OFF
IMAGE HOLD OFF
CAMERA O
NETWORK O
** SET UP MENU **
PRESET 1 O
MAP O
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF
FLIP-A-CHIP OFF
CLEANING OFF
IMAGE HOLD OFF
CAMERA O
NETWORK O
** SET UP MENU **
PRESET 1 O
MAP O
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF
FLIP-A-CHIP OFF
CLEANING OFF
IMAGE HOLD OFF
CAMERA
O
NETWORK O