Filter
Top Products
-31-
● Position Setting (POSITION SET)
Aligns the camera position and focal point by panning,
tilting, zooming and focusing.
1. Move the cursor to POSITION SET on the preset
setting menu and press the CAM (SET) key.
The position setting menu appears.
2. To Set Panning/Tilting Positions
(1) Move the cursor to PUSH SET for PAN/TILT
and press the CAM (SET) key. The PAN/TILT
setting menu appears.
(2) Select panning/tilting positions by moving the
joystick up and down, right and left, and press
the CAM (SET) key.
The positions are set and the screen returns to
the position setting menu.
Note: When you press the CAM (SET) key, the
camera might move slightly to memorize the
nearest panning/tilting position.
3. To Set the Lens Zoom and Focus Positions
(1) Move the cursor to PUSH SET for
ZOOM/FOCUS and press the CAM (SET) key.
The ZOOM/FOCUS setting menu appears.
(2) Select a zoom position by moving the zoom
control up and down, and a focus position by
moving the focus control up and down, and
then press the CAM (SET) key.
The positions are set and the screen returns to
the position setting menu.
Notes:
• When the camera is used at a nearly horizontal
angle, the focus may not be adjustable to a
high level of accuracy.
• If you move the cursor to the position number
and move the joystick to the right or left, the
position number can be selected.
The selected preset position number can also
be set after pressing the CAM (SET) key.
• The preset and camera IDs appear in the
lower-left corner of the position setting menu
after they have been set.
• With the WV-CU550CJ, you can also select a
zoom position by moving the zoom wheel con-
troller to the right or left.
• With the WV-CU550CJ, you can also select a
focus position automatically by pressing the
top button.
4. Move the cursor to RET and press the CAM (SET)
key to return to the preset setting menu.
** PRESET NUMBER SET **
2
6
10 11 12
1
5
9
13 14 15 16
ID:
RET
3
7
4
8
PRESET NO. 1
POSITION SET
O
PRESET ID ON O
ALC/MANUAL ALC O
AF MODE MANUAL
RET DEL
→
PUSH SET
→
PUSH SET
** POSITION 1 **
PAN/TILT
ZOOM/FOCUS
RET
FLOOR 1
DOOR
→
PUSH SET
→
PUSH SET
** POSITION 1 **
PAN/TILT
ZOOM/FOCUS
RET
FLOOR 1
DOOR
** POSITION 1 **
PAN/TILT
→
PUSH SET
ZOOM/FOCUS
→
PUSH SET
U ZOOM D/L FOCUS R
RET
FLOOR 1
DOOR