Filter
Top Products
-19-
■ Network Setup Parameters vs. Connection Type
Connection type Item Parameter description
Connection type 1 IP address Enter "192.168.0.XXX" (where XXX should be a number from 2 to
254 except the same IP addresses already assigned to the PC or
any other cameras).
Net mask Use the default setting "255.255.255.0" for the subnet mask.
Default gateway 192.168.0.1
Host name NW_Camera
Network speed Select the network speed by pressing the [o] button.
Selectable parameters: Auto (default setting), 100 Mbps (full
duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps
(half duplex)
HTTP port Use the default setting "80" for the HTTP port.
DHCP Click OFF.
DNS Click OFF.
Primary DNS 0, 0, 0, 0
Secondary DNS 0, 0, 0, 0
DDNS Click OFF.
Host name None
User name None
Password None
Access interval None
Connection type 2 IP address Enter the IP address assigned by your network administrator.
The setting is not required if DHCP is used in an intranet.
Net mask Enter the Net mask assigned by your network administrator.
The setting is not required if DHCP is used in an intranet.
Default gateway Enter the IP address of the default gateway assigned by your net-
work administrator.
The setting is not required if DHCP is used in an intranet.
Host name Contact your network administrator and enter the assigned host
name if required.
Network speed Select the network speed by pressing the [o] button.
Selectable parameters: Auto (default setting), 100 Mbps (full
duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps
(half duplex)
HTTP port Use the default setting "80" for the HTTP port.
DHCP Click ON if the intranet uses DHCP.
DNS Click ON when using the DNS server.
Primary DNS 0, 0, 0, 0
Secondary DNS Enter the IP address of DNS when using the DNS server.
Contact your Internet service provider for the IP address of DNS.
Primary and secondary IP addresses can be set for the DNS.
DDNS Click ON when using DDNS function.
Host name Ask your administrator
User name Ask your administrator
Password Ask your administrator
Access interval Ask your administrator