Filter
Top Products
Preparation
11
VQT1B25
Attaching the Lens
Cap/Strap
∫ Lens Cap (supplied)
1 Pass the string through the hole
on the lens cap.
2 Pass the same string through the
hole on the camera.
3 Attach the lens cap.
•When you turn the camera off, carry the
camera or play back the pictures, attach
the lens cap to protect the surface of the
lens.
•Detach the lens cap before turning on the
camera in the recording mode.
•Be careful not to lose the lens cap.
∫ Strap (supplied)
1 Pass the strap through the hole at
the strap eyelet.
2 Pass the strap through the
stopper and fasten the strap.
A: Pull the strap 2 cm or more.
•Attach the strap to the other side of the
camera being careful not to twist it.
•Check that the strap is firmly attached to
the camera.
•Attach the strap so that the “L
UMIX” LOGO
is on the outside.
DMC-FZ8_PP ENG.book 11 ページ ２００６年１２月２６日 火曜日 午後４時２０分