Filter
Top Products
Others
129
VQT1B25
•Did you record the pictures after setting
the clock correctly on this unit? (P19)
For example, if the clock setting on the
camera is different from the date and
time set on the PC and you acquire
pictures recorded with the camera to
the PC and then write them back to the
card, the pictures may be displayed with
dates different from the actual recording
dates in calendar playback etc.
∫ TV, PC and printer
1:The picture does not appear on the
television.
•Is the camera connected to the TV
correctly?
•Set the TV input to external input mode.
2:The display areas on the TV screen
and the camera’s LCD monitor are
different.
Depending on the TV model, the area
display may be smaller so the picture
may be stretched horizontally or
vertically and the top and bottom or left
and right of the picture may be cut off
when it is displayed. This is due to the
TV specifications and is not a
malfunction.
3:The motion pictures cannot be played
back on a TV.
•Are you trying to play back the motion
pictures by directly inserting the card in
the card slot of the TV?
–Connect the camera to the TV with
the AV cable (supplied) and then play
back the pictures on the camera.
4:The picture is not displayed fully on
the TV.
•Set the aspect of the TV on the camera.
(P25)
5:The picture cannot be transferred
when the camera is connected to a
PC.
•Is the camera connected to the PC
correctly?
•Is the camera recognized by the PC
correctly?
•Set the camera to a mode other than
[ ] mode. (P110)
6:The card is not recognized by the PC.
(The built-in memory is recognized.)
•Disconnect the USB connection cable.
Connect it again while the card is
inserted in the camera.
7:The picture cannot be printed when
the camera is connected to a printer.
•Does the printer support PictBridge?
–You cannot print pictures with printers
which do not support PictBridge.
(P113)
•Reset the mode to [ ]. (P113)
8:The ends of the pictures are cut at
printing.
•When using a printer with a trimming or
borderless printing function, cancel this
function before printing. (For details,
refer to the operating instructions for the
printer.)
•When you order photo studios to print
pictures, ask the photo studio if the
pictures can be printed with both ends.
∫ Others
1:An unreadable language was selected
by mistake.
•Press [MENU/SET], select the [SETUP]
menu icon [ ] and then select the [ ]
icon to set the desired language. (P25)
2:The camera will make sounds caused
by internal mechanical movement
when it is shaken.
•The sound arises when the lens moves.
This is not a malfunction.
3:The setting for the auto review
function is disabled.
•Are you taking pictures using auto
bracket (P49)? Is the camera in burst
mode (P51) or motion picture mode
[ ] (P70)? Is [AUDIO REC.] set to
[ON] (P82)?
–In these cases, you cannot set the
auto review function in the [SETUP]
menu.
DMC-FZ8_PP ENG.book 129 ページ ２００６年１２月２６日 火曜日 午後４時２０分