Filter
Top Products
Others
118
VQT1B25
Others
Using the MC
Protector/ND Filter
The MC protector (DMW-LMC52; optional)
is a transparent filter which affects neither
the colors nor the amount of light, so it can
always be used to protect the camera’s
lens.
The ND filter (DMW-LND52; optional)
reduces the amount of light to
approximately 1/8th (equal to adjusting the
aperture value 3 increments) without
affecting the color balance.
1 Attach the hood adaptor.
2 Attach the MC protector 1 or the
ND filter 2.
•You cannot attach the MC protector and
the ND filter at the same time.
•If the MC protector/ND filter are tightened
too much, you may not be able to remove
them. Do not tighten them too much.
•Do not hold the MC protector/ND filter too
tightly.
•When taking pictures with the flash using
the MC protector or ND filter, vignetting
effect may occur.
•If the MC protector/ND filter are dropped,
they may be destroyed. Be careful not to
drop them when attaching them to the
camera.
•You can attach the lens hood when the
MC Protector and ND Filter are attached.
•You cannot attach a conversion lens or the
close-up lens to the hood adaptor.
•The lens adaptor (DMW-LA2; optional) is
necessary to attach a conversion lens or
close-up lens.
•MCu“Multi-coated”
NDu“Neutral Density”
DMC-FZ8_PP ENG.book 118 ページ ２００６年１２月２６日 火曜日 午後４時２０分