Filter
Top Products
Basic
29
VQT1B25
∫ Preventing jitter (camera shake)
•Be careful of jittering when pressing the
shutter button.
•If jitter could occur because of slow
shutter speed, the jitter alert A appears.
•When the jitter alert appears, we
recommend using a tripod. If you cannot
use a tripod, be careful how you hold the
camera (P27). The use of the self-timer
prevents jittering caused by pressing the
shutter button when you are using a tripod
(P47).
•Shutter speed will be slower particularly in
the following cases. Keep the camera still
from the moment the shutter button is
pressed until the picture appears on the
screen. We recommend using a tripod.
–Slow sync./Red-eye reduction (P43)
–[NIGHT PORTRAIT] (P64)
–[NIGHT SCENERY] (P65)
–[PARTY] (P65)
–[CANDLE LIGHT] (P65)
–[STARRY SKY] (P67)
–[FIREWORKS] (P68)
–When you set to a slow shutter speed
(P56, 57)
∫ Program shift
In program AE mode, you can change the
preset aperture value and shutter speed
without changing the exposure. This is
called program shift.
You can make the background more blurred
by decreasing the aperture value or record
a moving subject more dynamically by
slowing the shutter speed when taking a
picture in program AE mode.
•Press the shutter button halfway and then
use the joystick to activate program shift
while the aperture value and the shutter
speed are displayed on the screen (about
10 seconds).
•The
program
shift indication
D
appears on
the screen when
program
shift is activated.
•Program shift is canceled if the camera is
turned off or the joystick is moved up and
down until the program shift indication
disappears.
∫ Example of program shift
(A): Aperture value
(B): Shutter speed
1 Program shift amount
2 Program shift line chart
3 Program shift limit
•If the exposure is not adequate when the
shutter button is pressed halfway, the
aperture value and shutter speed turns red.
•Program shift is canceled and the camera
returns to normal program AE mode if
more than 10 seconds pass after program
shift is activated. However, the program
shift setting is memorized.
•Depending on the brightness of the subject,
program
shift may not be activated.
1/10
1/10
F2.8
F2.8
7
1/30
1/30
F4.0
F4.0
1/60
1/60
F2.8
F2.8
1 2 3 4 5 6 7 8 9 10 11 12 13
1 1
/
2
1
/
4
1
/
8
1
/
15
1
/
30
1
/
60
1
/
125
1
/
250
1
/
500
1
/
1000
1
/
2000
2
2.8
4
5.6
8
11
(B)
(A)
14
DMC-FZ8_PP ENG.book 29 ページ ２００６年１２月２６日 火曜日 午後４時２０分