Filter
Top Products
Preparation
23
VQT1B25
[POWER SAVE]
(Turning off this unit automatically.)
Press [ ] to display the [SETUP] menu
and select the item to set. (P21)
Power save mode is activated (the camera
is automatically turned off to save the
battery life) if the camera has not been
used for the time selected on the setting.
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.], [OFF]:
•Press the shutter button halfway or turn
the camera off and on to cancel power
save mode.
•In simple mode [ ], power save mode is
fixed to [5MIN.].
•Power save mode is not activated in the
following cases.
–When using the AC adaptor
(DMW-AC7PP; optional)
–When connecting to a PC or a printer
–When recording or playing back motion
pictures
–During a slide show (P97)
[WORLD TIME] (P74)
Press [ ] to display the [SETUP] menu
and select the item to set. (P21)
Set the time in your home area and travel
destination.
[]:Home area.
[]:Travel destination area.
[MONITOR/VIEWFINDER]
Press [ ] to display the [SETUP] menu
and select the item to set. (P21)
You can adjust the brightness of the
monitor or the Viewfinder in 7 steps.
[GUIDE LINE]
Press [ ] to display the [SETUP] menu
and select the item to set. (P21)
Set the pattern of the guide lines displayed
when taking pictures.
You can also set whether or not to have the
recording information and histogram
displayed when the guide lines are
displayed. (P38, 40)
[REC. INFO.]: [ON]/[OFF]
[HISTOGRAM]:[ON]/[OFF]
[PATTERN]: [ ]/[ ]
[TRAVEL DATE] (P72)
Press [ ] to display the [SETUP] menu
and select the item to set. (P21)
Set the departure date and the return date
of the vacation.
[SET], [OFF]
[PLAY ON LCD] (P40)
Press [ ] to display the [SETUP] menu
and select the item to set. (P21)
If you selected the Viewfinder in a
recording mode, the display will
automatically switch to the LCD monitor
when reviewing or playing back the
pictures.
[ON], [OFF]
[ZOOM RESUME]
Press [ ] to display the [SETUP] menu
and select the item to set. (P21)
The zoom position is stored when this unit
is turned off. When this unit is turned on
again, the zoom automatically returns to
the position it was at when this unit was
turned off. (P32)
[ON], [OFF]
•The zoom resume cannot be set in the
following cases.
–In simple mode [ ].
–When [CONVERSION] on the [REC]
mode menu is set to [ ] or [ ].
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
DMC-FZ8_PP ENG.book 23 ページ ２００６年１２月２６日 火曜日 午後４時２０分