Filter
Top Products
Advanced (Recording pictures)
42
VQT1B25
3 Press [MENU/SET].
•The [POWER LCD] B or [HIGH
ANGLE] C icon appears.
∫ Canceling Power LCD or High angle
mode
•If you press and hold [LCD MODE] again
for 1 second the screen shown in step
2
is displayed. Select [OFF] to cancel Power
LCD mode or High angle mode.
•High angle mode is also canceled if you
turn the camera off or power save mode is
activated.
•The brightness of the pictures displayed
on the LCD monitor is adjusted when
Power LCD mode or High angle mode is
activated. Therefore, some subjects may
look different on the LCD monitor.
However, this does not affect the recorded
pictures.
•The LCD monitor automatically returns to
normal brightness after 30 seconds when
recording in Power LCD mode. Press any
button to make the LCD monitor bright
again.
•If the LCD monitor screen is difficult to see
because of light from the sun etc. shining
on it, we recommend using your hand or
another object to block the light when
using the camera.
•High angle mode is not activated in the
following cases.
–In simple mode [ ]
–In playback mode [ ]
–In print mode [ ]
–While the menu screen is displayed
–While the review screen is displayed
[]:
[POWER LCD]
The LCD monitor
becomes brighter and
easier to see even when
taking pictures outdoors.
[]:
[HIGH ANGLE]
The LCD monitor is
easier to see when taking
pictures with the camera
held high above your
head. This is useful when
you cannot get close to
the subject because
there is a person in the
way. (However it
becomes more difficult to
see when looked at
straight on.)
[OFF] The LCD monitor returns
to the normal brightness.
B
C
7
DMC-FZ8_PP ENG.book 42 ページ ２００６年１２月２６日 火曜日 午後４時２０分