Filter
Top Products
Advanced (Recording pictures)
50
VQT1B25
Optical Image
Stabilizer
This mode detects jitter and compensates
for it.
1 Press and hold the optical image
stabilizer button until
[STABILIZER] appears.
2 Press 3 4 to select the
stabilizer function mode and then
press [MENU/SET].
•You can also use the joystick to select.
∫ About the jitter/movement detection
demonstration screen
Press 1 on the screen shown in step
2 to
display the jitter/movement detection
demonstration screen. (You cannot take
pictures while the demonstration screen is
displayed.)
Press 1 to exit the demonstration screen.
A: Jitter detection demonstration
B: Movement detection demonstration
•The camera automatically detects the
jitter and the movement of the subject and
displays these on the indicator.
•We recommend using a bright subject
with high contrast for the subject
movement demonstration.
•The jitter/movement detection
demonstration screen is an approximation.
•The camera also detects the movement of
the subject when automatically setting the
ISO sensitivity in intelligent ISO sensitivity
mode [ ] (P52) and [SPORTS] (P63),
[BABY1]/[BABY2] (P66) and [PET] (P67)
in scene mode.
•The stabilizer function may not be
effective in the following cases.
–When there is a lot of jitter.
–When the zoom magnification is high.
–In digital zoom range.
–When taking pictures while following a
moving subject.
–When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
•In simple mode [ ], the setting is fixed to
[MODE1] and in [STARRY SKY] (P67) in
scene mode it is fixed to [OFF]. The
stabilizer function mode selection menu
does not appear.
•In motion picture mode [ ] or
[PANNING] in scene mode, [MODE2]
cannot be set.
[MODE1]
()
The stabilizer operates
continuously and can assist
during photo composition.
[MODE2]
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
()
When the stabilizer is not
desired.
STABILIZER
OFF
MODE2
DEMO.
SELECT
SET
MENU
MODE1
MENU
SET
EXIT
JITTER, SUBJ. MOVE DEMO.
CANNOT BE DISPLAYED
IN REC MODE
DMC-FZ8_PP ENG.book 50 ページ ２００６年１２月２６日 火曜日 午後４時２０分