Filter
Top Products
Others
127
VQT1B25
7:The recorded picture looks rough.
Noise appears on the picture.
•Is the ISO sensitivity high or the shutter
speed slow?
(ISO sensitivity is set to [AUTO] when
the camera is shipped. Therefore, when
taking pictures indoors etc. the ISO
sensitivity increases.)
–Decrease the ISO sensitivity. (P79)
–Set [NOISE REDUCTION] in
[PICT.ADJ.] to [HIGH] or set every
item except [NOISE REDUCTION] to
[LOW]. (P86)
–Take pictures in bright places.
•In [HIGH SENS.] (P67) in scene mode,
the resolution of the recorded picture
decreases slightly because of high
sensitivity processing.
This is not a malfunction.
8:The brightness or the hue of the
recorded picture is different from the
actual scene.
•If recording under fluorescent light, the
brightness or the hue may change
slightly when the shutter speed
becomes fast. This occurs due to the
characteristics of fluorescent light. It is
not a malfunction.
9:A reddish vertical line appears on the
LCD monitor when the shutter button
is pressed halfway or when recording
motion pictures.
•This is a phenomenon
called smear. It is a
characteristic of CCD
and appears when the
subject has a bright
part. Black or green
vertical lines may also appear or
uneven colors may appear around the
smear. This is not a malfunction. It is
recorded in motion pictures but is not
recorded on still pictures.
10: Motion picture recording stops in
the middle.
•Are you using a MultiMediaCard?
–This unit does not support
MultiMediaCards.
•When you set the picture quality to
[30fpsVGA] or [30fps16:9], we
recommend using a High Speed SD
Memory Card with “10MB/s” or greater
displayed on the package.
•Depending on the type of the card,
recording may stop in the middle.
11: When the shutter button is pressed
halfway, the image becomes a still
image for that instant.
•Is 3-area focusing (High speed) or
1-area focusing (High speed) selected
as the AF mode? (P83)
12: The zoom does not move.
•Is [CONVERSION] set to [ ] or [ ]?
(P88)
∫ LCD monitor/Viewfinder
1:The LCD monitor/Viewfinder becomes
darker or brighter for a moment.
•This phenomenon appears when you
press the shutter button halfway to set
the aperture value and does not affect
the recorded pictures.
2:The LCD monitor flickers indoors.
•The LCD monitor may flicker for a few
seconds after turning the camera on
indoors under fluorescent light.
This is not a malfunction.
3:The LCD monitor/Viewfinder is too
bright or dark.
•Adjust the brightness of the screen. (P23)
•Is the power LCD function or high angle
mode activated?
4:The picture is not displayed on the
LCD monitor.
•Does the picture appear on the
Viewfinder?
–Press the [EVF/LCD] button to switch
to LCD monitor display.
DMC-FZ8_PP ENG.book 127 ページ ２００６年１２月２６日 火曜日 午後４時２０分