Filter
Top Products
Advanced (Recording pictures)
78
VQT1B25
3 Aim the camera at a sheet of white paper
etc. so that the frame in the center is
filled by the white object only and then
press [MENU/SET].
4 Press [MENU/SET] twice to close the
menu.
•You can also press the shutter button
halfway or press the center of the
joystick to finish.
•When you take a picture with the flash, the
white balance may not be properly
adjusted if the flash level is insufficient for
the subject.
•The white balance setting is memorized
even if the camera is turned off. However,
the white balance setting for a scene
mode returns to [AWB] when the scene
mode is changed.
•The white balance cannot be set in the
following cases.
–In simple mode [ ].
–In [SCENERY], [PANNING],
[NIGHT PORTRAIT],
[NIGHT SCENERY], [FOOD], [PARTY],
[CANDLE LIGHT], [SUNSET],
[STARRY SKY], [FIREWORKS],
[BEACH], [SNOW] and
[AERIAL PHOTO] in scene mode.
Press [ ] to display the [REC] mode
menu and select the item to set. (P76)
You can adjust the white balance finely
when you cannot acquire the desired hue
by setting the white balance.
1 Press 3/4/2/1 to finely adjust
the white balance.
•2 : A (AMBER: ORANGE)
•1 : B (BLUE: BLUISH)
•3 : G_ (GREEN: GREENISH)
•4 : M` (MAGENTA: REDDISH)
2 Press [MENU/SET] to finish.
•You can also press the center of the
joystick to finish.
•If you finely adjust the white balance to
A (amber), the white balance icon on
the LCD monitor will change to orange.
If you finely adjust the white balance to
B (blue), the white balance icon on the
LCD monitor will change to blue.
•If you finely adjust the white balance to
G_ (green) or M` (magenta),
[_] (e.g. : ) or [`] (e.g. : )
appears beside the white balance icon
on the LCD monitor/Viewfinder.
•Select the center point if you are not
finely adjusting the white balance.
WHITE SET
SETCANCEL
MENU
MENU
SET
[WB ADJUST.]
Finely adjusting the white balance
MENU
SET
WB ADJUST.
ADJUST.
SET
MENU
AWB
AWB
or
DMC-FZ8_PP ENG.book 78 ページ ２００６年１２月２６日 火曜日 午後４時２０分