Filter
Top Products
VQT1U50
32
Preparation
• The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear differently from actuality on the LCD monitor. However, this does not affect the
recorded pictures.
• The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD mode. Press any button to make the LCD monitor bright again.
• If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or
another object to block the light.
• The number of recordable pictures decreases in Auto power LCD and Power LCD modes.
• The folder number is updated and the file number starts from 0001. (P119)
• A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting
the card (P34) after saving the data on a PC or elsewhere.
• To reset the folder number to 100, format the card first and then use this function to reset the
file number.
A reset screen for the folder number will then appear. Select [YES] to reset the folder number.
• When [SETUP] menu settings are reset, the following settings are also reset. In addition,
[FAVORITE] (P111) in [PLAYBACK] mode menu is set to [OFF], and [ROTATE DISP.] (P112) is
set to [ON].
– Film mode (P81)
– The birthday settings for [BABY1]/[BABY2] (P93) and [PET] (P94) in scene mode.
– The [WORLD TIME] (P133) setting.
• The folder number and the clock setting are not changed.
• This will work when the video cable is connected.
• This will work when the video cable is connected.
v [NO.RESET] Reset the file number of the next recording to 0001.
w [RESET]
The [REC] or [SETUP]/[CUSTOM MENU] menu settings are reset
to the initial settings.
[BEEP]
Set the focus confirmation beep, the self-timer beep and the
alarm beep.
[s] (Muted)
[t] (Low)
[u] (High)
| [VIDEO OUT]
Set to match the colour television system in each country.
[NTSC]: Video output is set to NTSC system.
[PAL]: Video output is set to PAL system.
[TV ASPECT]
Set to match the type of TV.
[W]: When connecting to a 16:9 screen TV.
[X]: When connecting to a 4:3 screen TV.