Filter
Top Products
VQT1U50
80
Advanced (Recording pictures)
Note
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
• Refer to P60 for the flash range.
• Depending on the brightness and how fast the subject is moving, jitter may not be avoided even
if [ ] is selected.
• Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
• The setting is fixed to [ ] in the following cases.
– In [BABY1]/[BABY2] and [PET] in scene mode
– In [INDOOR PORTRAIT], [NORMAL SPORTS], [OUTDOOR SPORTS] and [INDOOR
SPORTS] in advanced scene mode
• Programme shift cannot be activated when the ISO sensitivity is set to [ ].
• You cannot select [ ] in shutter-priority AE mode and manual exposure mode. Also, you
cannot select [AUTO] in manual exposure mode.
• To avoid picture noise, we recommend reducing the ISO sensitivity, setting [NOISE RED.] in
[FILM MODE] towards [_] or setting the items except [NOISE RED.] towards [`] to take
pictures. (P82)