Filter
Top Products
10
VQT1F36
Quick Guide
ª Charging the battery
1) Connect the AC cable to the AC adaptor
and the AC outlet.
2) Put the battery on the battery mount by
aligning the mark, and then securely plug
it in.
≥The output plug of the AC cable is not
completely connected to the AC adaptor
jack. As shown in A, there is a gap.
ª Inserting the battery
1) Open the battery cover.
≥Push A while sliding it.
2) Insert the battery until it clicks paying
attention to the direction of the battery.
B Push the center of the battery until it
locks.
3) Close the battery cover.
ª Removing the battery
1) Open the battery cover.
2) Remove the battery.
≥Move A in the direction of the arrow to
unlock it and then remove the battery.
3) Close the battery cover.
ª How to turn on the power
While pressing the lock release button, set
the mode dial to , or .
≥Rotate the mode dial while at the same time
pressing in the lock release button A if
changing from OFF to another mode.
≥Align with the status indicator B.
ª How to turn off the power
Set the mode dial to OFF.
A
A
B
A
PC
B
A
VQT1F36_ENG_PP.book 10 ページ ２００７年２月２６日 月曜日 午前１１時２９分