Filter
Top Products
60
VQT1F36
Recording
To cancel the guide line function
Press the MENU button, then select [BASIC] or
[PLAY SETUP] # [GUIDE LINES] # [OFF] and
press the cursor button.
≥The guide lines do not appear on the images
actually recorded.
¬
Rotate the mode dial to select .
Press the MENU button, then select
[VIDEO]
# [WIND CUT] # [ON] and
press the cursor button.
To cancel the wind noise reduction
function
Press the MENU button, then select [VIDEO] #
[WIND CUT] # [OFF] and press the cursor
button.
≥This function’s default setting is [ON].
≥The wind noise reduction depends on the wind
strength. (The surround effect may be reduced
if this function is activated in strong winds.
However, the surround effect is automatically
restored when then the wind weakens.)
≥The wind noise reduction function does not
work with an external microphone.
When recording, the input level from the built-in
microphones and the external microphone
terminal can be adjusted.
¬
Rotate the mode dial to select .
1 Press the MENU button, then
select [VIDEO]
# [MIC LEVEL] #
[SET
rAGC] or [SET] and press
the cursor button.
AGC: Auto Gain Control
[AUTO]: AGC is activated, and the
recording level is adjusted
automatically.
[SETrAGC]: The desired recording level can be
set. AGC will also be activated to
reduce the amount of sound
distortion.
[SET]: AGC is not activated and so natural
recording can be performed.
Wind noise reduction function
This is for reducing the wind noise
coming into the microphone when
recording.
Microphone level
This is for adjusting the microphone
input level.
VQT1F36_ENG_PP.book 60 ページ ２００７年２月２６日 月曜日 午前１１時２９分