Filter
Top Products
89
VQT1F36
With other products
Dubbing images onto a
connected DVD recorder or
video device
This is for dubbing images recorded on this unit
onto a DVD recorder, video device etc.
≥Images are dubbed in standard quality.
≥Use the AC adaptor to free you from worrying
about the battery running down.
1 Connect this unit and a video
device.
A AV cable (supplied)
≥Insert the plugs as far as they will go.
2 Set the mode dial to to turn
on the power.
3 Change the input channel on the
video device and TV.
≥The channel set will differ depending on the
terminal to which the unit is connected.
4 Start playback on this unit. Then
start recording on the connected
device.
≥See the operating instructions of the video
device for details.
To stop dubbing
1) Stop recording on the connected device.
2) Then stop playback on this unit.
≥If the date and time display and function
indication are unnecessary, cancel them before
dubbing. (l 41, 80)
VIDEO IN
AUDIO IN
A
If the dubbed images are played back on a
wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction
of the device you are connecting to or read the
operating instructions of the wide-screen TV
and set the aspect ratio to 16:9.
VQT1F36_ENG_PP.book 89 ページ ２００７年２月２６日 月曜日 午前１１時２９分