77
VQT1F36
Editing
5 When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other files
Repeat steps 3-5.
To complete editing
Press the MENU button.
ª Deleting still picture files
recorded on an SD card by other
products
A still picture file (other than JPEG) that cannot
be played back on this unit may be erased.
≥Protected files cannot be deleted.
≥Do not open the card slot cover while deleting.
The deletion will stop.
≥In case of [ALL SCENES], the deletion may
take time if there are many files on the SD card.
≥Do not turn off this unit while deleting.
≥When you delete files, use a battery with
sufficient battery power or use the AC adaptor.
≥If files conforming to DCF standard are deleted,
all the data related to the files will be deleted.
Files recorded on an SD card can be protected
so that they are not deleted by mistake. (Even if
you protect some files on an SD card, formatting
the SD card will delete them.)
¬
Rotate the mode dial to select
and then select the (still picture
playback) tab.
1 Press the MENU button, then
select [PLAY SETUP]
#
[SCENE PROTECT] # [YES] and
press the cursor button.
2 Select the file to be protected and
then press the center of the
cursor button.
The [ ] indication appears and the file is
protected.
≥Press the cursor button again to cancel the
setting.
≥You can also select multiple files in
succession.
To complete the settings
Press the MENU button.
Protecting still pictures
This is for preventing still picture files
from being deleted by mistake.
VQT1F36_ENG_PP.book 77 ページ 2007年2月26日 月曜日 午前11時29分