Filter
Top Products
With other products
84
VQT1F36
1 Connect this unit and a TV with the component cable (supplied) and the
AV cable (supplied).
A Component cable (supplied)
B AV cable (supplied)
≥Connect to terminals of the same color.
≥The component terminal C is for outputting images only so be sure to also connect the AV cable.
(Insert it in the audio input terminal for the component terminal input. Refer to the operating
instructions of the TV for details.)
2 Set the mode dial to to turn on the power.
3 Select the input channel on the TV.
Example: Select the [Component] channel etc.
(The name of the channel may differ depending on the connected TV.)
4 Start playback on this unit.
The image and audio are output on the TV.
ª About the setting when connecting the component terminals
When this unit is connected to a TV with the component cable, the output setting on this unit can be
changed. Set it to match the terminal on the TV that you connect to.
Press the MENU button, then select [SETUP] # [COMPONENT OUT] #
desired item and press the cursor button.
[480i]: When connecting to the component terminal on the TV compatible with 480i.
(Playback is in standard quality.)
[1080i]: When connecting to the component terminal on the TV compatible with 1080i.
(Playback is in high definition quality.)
3 Connecting with the component cable (supplied) and the AV cable
(supplied)
C
AUDIO IN
A
B
A/V
COMPONENT
COMPONENT
VIDEO IN
VQT1F36_ENG_PP.book 84 ページ ２００７年２月２６日 月曜日 午前１１時２９分