Filter
Top Products
107
8
Chapter 8 Menu Description Tables (continued)
8-3-12 CAMERA SETTING
ZEBRA Pattern Display
<Note>
All items in CAMERA SETTING are setting targets of the
item PAINT MENU SW() R/W in the <SD CARD R/W
SELECT> screen.
8-4 VF
8-4-1 VF DISPLAY
The ____ in the Adjustable Range column indicates the
preset mode.
Items/
Data Saved
Adjustable
Range
Remarks
DETAIL ON
OFF
Set the DTL (H, V) to ON or OFF.
SCUFE
2D LPF ON
OFF
ON/OFF switching for the two-
dimensional LPF that reduces cross-
color.
SCUFE
HIGH COLOR ON
OFF
ON/OFF switching for the HIGH
COLOR mode, which enhances the
color dynamic range.
SCUFE
GAMMA ON
OFF
Set the gamma circuit to ON or OFF.
SCUFE
TEST SAW ON
OFF
Switch the test signal ON or OFF.
SCUFE
FLARE ON
OFF
Set the flare correction to ON or OFF.
SCUFE
H-F COMPE. ON
OFF
ON/OFF switching for the H-F COMPE
mode, which enhances the DTL in the
high-frequency range.
SCUFE
SPOTOFFON
109%
0%
ZEBRA 2
DETECT
ZEBRA 2
ZEBRA 1
DETECT
Video Level
Items/
Data Saved
Adjustable
Range
Remarks
DISP
CONDITION
NORMAL
HOLD
NORMAL
: Display status constantly.
HOLD: Display status only when the
MODE CHECK switch is
pressed.
–CUFE
DISP MODE 1
2
3
Set the DISP MODE.
Switch the camera’s Warning/Message
indication. Please refer to [4-7-4
Display Modes and Setting Changes/
adjustment Result Messages] for more
information.
–CUFE
VF OUT Y
NAM
R
G
B
Select the VF output.
Y: Brightness signal
NAM: Output signal with the highest
level among R, G, and B
signals.
R: Rch signal
G: Gch signal
B: Bch signal
–CUFE
VF DTL 0
:
3
:
5
Select the VF DTL.
Additionally enhance the DTL for the
VF signal. 0 setting is the same DTL as
the primary scan lines.
–CUFE
ZEBRA1
DETECT
0%
:
70%
:
109%
Set the ZEBRA1 detection level (IRE
value).
–CUFE
ZEBRA2
DETECT
0%
:
85%
:
109%
Set the ZEBRA2 detection level (IRE
value).
–CUFE
ZEBRA2 OFF
SPOT
ON
Set the ZEBRA2 to ON, OFF, or SPOT.
–CUFE
LOW LIGHT LVL OFF
10%
15%
20%
25%
30%
35%
Set the camera incoming light volume
at which to display LOW LIGNT.
–CUFE
ECU MENU
DISP.
ON
OFF
Set the menu display on the VF to ON
or OFF when the ECU is connected.
–CUFE
50M
INDICATOR
ON
OFF
Set the 50M recording indication to ON
or OFF.
–CUFE
MARKER/CHAR
LVL
50%
60%
70%
80%
90%
100%
Adjust the brightness of markers and
characters displayed on the VF.
–CUFE
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ