Filter
Top Products
58
Chapter 4 Adjustments and Settings for Recording (continued)
6 Turn the JOG dial button until a desired character
appears.
The characters that appear are switched in the
following order:
Space:
Ð
Alphabetical characters: A to Z
Ð
Numerals: 0 to 9
Ð
Symbols: ', >, <, /, -
7 Press the JOG dial button to accept a desired
character.
8 Turn the JOG dial button to move the cursor to the next
digit (clockwise), and repeat Steps
6 - 7 to set
characters (up to eight characters).
9 When the title is set, turn the JOG dial button to move
the cursor to [:].
10 Press the JOG dial button to return the cursor to the
option [TITLE:].
11 Turn the JOG dial button to move the cursor to the
option [WRITE].
12 Press the JOG dial button to display the following
message:
The data will not be written if any of the following messages
appears when the JOG dial button is pressed:
13 Turn the JOG dial button to move the cursor to YES.
Then, press the dial button.
When the data has been written, the following message
appears:
14 To exit the menu, press the MENU button.
The settings menu disappears and the status of the AJ-
SPC700P is indicated at the top and bottom of the
viewfinder screen.
To write data on a selected file
6'&$5'5($':5,7(!
56(/(&7
5($'
:6(/(&7
:5,7(
&$5'&21),*
7,7/(5($'
7,7/(
:5,7("
<(6
12
7,7/(
Error message Remedy
WRITE NG
NO CARD
(No SD memory card inserted.)
Insert an SD memory card.
WRITE NG
FORMAT ERROR
(SD memory card not properly
formatted.)
The card has not been
formatted using the AJ-
SPC700P.
Replace the card.
WRITE NG
ERROR
(SD memory card not writable.)
The card may be defective.
Replace the card.
WRITE NG
WRITE PROTECT
(SD memory card write-
protected.)
Remove the card and disable
the protect.
WRITE NG
CANNOT ACCCESS
(SD memory card not
accessible).
Example: The SD memory card
is not accessible because it is
being played back.
After the operation in process,
format the card.
WRITENG
CARD FULL
(SD memory card has no free
space.)
The card is not writable because
it has no free space. Delete
unwanted files or replace the
card with a new one.
:5,7(2.
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ