Filter
Top Products
99
8
Chapter 8 Menu Description Tables (continued)
8-2 SYSTEM SETTING
8-2-1 SYSTEM MODE
8-2-2 OPTION MODE
<Note>
Menu options for setting 1394 are displayed when an
IEEE1394 interface board (AJ-YAD800G, optional) is
attached. For more information, see the AJ-YAD800G
instruction manual. Note that the AJ-SPC700P incorporates
the following additional items:
The ____ in the Adjustable Range column indicates the
preset mode.
Items/
Data Saved
Adjustable
Range
Remarks
REC SIGNAL CAM
VIDEO
1394
Select video input signals.
CAM
Record the signal from the
camera
VIDEO:
Record the signal from the
GENLOCK IN terminal
1394: Record the signal from the 1394
input terminal (when optional
AJ-YAD800G is attached)
<Notes>
z After the power has been turned
OFF, this setting defaults to CAM
when the power is turned ON again.
z With VIDEO selected, to synchronise
this camera-recorder to the video
signal (VBS) that is input to the
GENLOCK IN terminal, the
GENLOCK item in [8-2-6 GENLOCK]
must be set to EXT.
–CUFE
ASPECT 16:9
4:3
Select the aspect ratio for recording.
16:9: Record in <16:9> aspect ratio.
4:3: Record in <4:3> aspect ratio.
–CUFE
REC MODE 50M
25M
DV
Select the recording mode.
50M: Record in DVCPRO50 format.
25M: Record in DVCPRO format.
DV: Record in DV format.
–CUFE
SET UP 0%
7.5%A
Switch the setup.
0%: Setup is switched to 0% for both
the camera output and the
recording.
7.5%A
: Setup is switched to 7.5% for
the camera output and 0% for
the recording.
–CUFE
REC TALLY RED
GREEN
CHAR
Selects display of the recording status
of the camera when the AJ-SPC700P is
controlling an external VTR, by setting
the menu option 1394 CONTROL to
“BOTH”.
The menu option 1394 CONTROL is
found in the OPTION MODE screen on
the SYSTEM setting page.
RED: The red tally lamp lights up.
GREEN
:The green tally lamp lights up.
CHAR
: The VF displays [REC] in
characters.
<Note>
1394 control menu options are only
displayed when an IEEE1394 interface
board (AJ-YAD800G, optional
accessory) is attached. For more
information, see the AJ-YAD800G
instruction manual.
–CUFE
ACCESS LED ON
OFF
Select whether or not to enable
illumination of the P2 card access
LEDs.
ON: Enable the P2 card access
LEDs to light up for card status
indications.
OFF: LEDs remain off.
–CUFE
Items/
Data Saved
Adjustable
Range
Remarks
USB ON
OFF
Select the USB drive mode when using
the P2 card as bulk storage by
connecting the AJ-SPC700P with a PC
via USB2.0.
ON: Switches to the USB drive
mode. Recording, playback or
thumbnail operation via the AJ-
SPC700P is not permitted.
OFF: Stops the USB drive mode, and
returns to normal operation.
<Note>
After the power is turned off, this setting
defaults to “OFF” when the power is
next turned on.
––UF–
Items/
Data Saved
Adjustable
Range
Remarks
SAVE SW (AUD
OUT)
ON
OFF
Select whether or not to forcibly disable
the audio output when the SAVE ON/
OFF switch is set to [ON].
ON: Disable audio output.
OFF: Enable audio output.
–CUF–
SAVE SW (LCD) ON
OFF
Select whether or not to automatically
turn off the LCD monitor when the
SAVE ON/OFF switch is set to [ON].
ON: Turn off LCD monitor.
OFF: Do not turn off LCD monitor.
–CUF–
Items/
Data Saved
Adjustabl
e Range
Remarks
1394
CONTROL
OFF
BOTH
Select the control method for recording
when an external device for backup
recording is connected via the DVCPRO/
DV connector:
OFF: The external device is not
controlled.
BOTH:Recording is performed by both
the AJ-SPC700P and the external
device.
–CUF–
1394 CMD SEL REC_P
STOP
Determine the recording operation of the
external backup device when the REC
START/STOP button is pressed:
REC_P
: Record/Pause
STOP:Record/Stop
–CUF–
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ