Filter
Top Products
59
4
Chapter 4 Adjustments and Settings for Recording (continued)
To read data on an SD memory card
1 Turn the JOG dial button to move the cursor to the
option [SD CARD READ/WRITE]. Then, press the dial
button.
2 Turn the JOG dial button to move the cursor to the
menu option [R. SELECT]. Then, press the dial button.
3 Turn the JOG dial button to select a desired number (1 -
8). Then, press the dial button.
4 Turn the JOG dial button to move the cursor to the
option [READ].
5 Press the JOG dial button to display the following
message:
6 Turn the JOG dial button to move the cursor to YES.
Then, press the dial button.
When the data has been read, the following message
appears:
The data will not be read if any of the following messages
appears when the JOG dial button is pressed:
7 To exit the menu, press the MENU button.
The settings menu will be replaced by status indications
for the AJ-SPC700P.
To select a file number
6'&$5'5($':5,7(!
56(/(&7
5($'
:6(/(&7
:5,7(
&$5'&21),*
7,7/(5($'
7,7/(
To read data on a selected file
6'&$5'5($':5,7(!
56(/(&7
5($'
:6(/(&7
:5,7(
&$5'&21),*
7,7/(5($'
7,7/(
5($'"
<(6
12
Error message Remedy
READ NG
NO CARD
(No SD memory card inserted.)
Insert an SD memory card.
READ NG
FORMAT ERROR
(SD memory card not properly
formatted.)
The card has not been
formatted using the AJ-
SPC700P.
Replace the card.
READ NG
NO FILE
(No file found.)
Write file data.
READ NG
ERROR
(SD memory card not readable.)
Only data written with the AJ-
SPC700P is readable.
READ NG
CANNOT ACCCESS
(SD memory card not
accessible.)
Example: The SD memory card
is not accessible because it is
being played back.
After the operation in process,
read data.
5($'2.
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ