Filter
Top Products
72
Chapter 5 Preparation (continued)
5-4 Preparing for Audio Input
Take the following steps to prepare the camera for
connecting audio input devices.
5-4-1 When Using the Front Microphone
The AJ-MC700P microphone kit (optional) includes a
microphone that can be mounted on the camera.
1 Open the microphone holder.
2 Mount the microphone and tighten the clamping screw.
3 Connect the microphone cable to the MIC IN jack on
the camera.
4 Set the AUDIO IN switch to [FRONT] depending on the
audio channel to be recorded.
5-4-2 When Using a Wireless Receiver
When Using the Unislot Wireless Receiver
1 Remove the cover to insert the wireless receiver and
secure it with the screws.
2 Set the AUDIO IN switch to [W.L.] depending on the
audio channel to be recorded.
Clamping Screw
MIC IN Jack
AUDIO IN
Switch
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ