Filter
Top Products
84
Chapter 6 Manuipulating Clips with Thumbnails (continued)
5 Names of metadata upload files stored on the SD
memory card are displayed. Select the desired files
using the cursor buttons, and choose YES. Upload
starts.
Uploaded metadata is retained even if the power is
turned off. For [more information on] confirmation of
uploaded data, see [6-17-4 Confirmation of Metadata
Upload].
Clip Meta Data items
Clip Meta Data includes the following items: Underlined
items can be set by reading the metadata upload file on the
SD memory card. Other items are set automatically during
shooting. Using the latest update version of P2 viewer,
metadata upload files can be written to SD memory cards
using a PC. Download the latest update version of P2 viewer
from the following URL and install it to your PC:
http://panasonic.biz/sav/p2
Regarding SD memory cards to be used, see <Cautions in
using SD memory cards> (page 17).
<Note>
The file which was edited by except P2 viewer is displayed
as “UNKNOWN DATA”, and may not be read.
GLOBAL CLIP ID:
Displays the global clip ID, which indicates the
shooting status of the clip.
VIDEO: Displays [FRAME RATE] (frame rate of the clip),
[PULL DOWN], and [ASPECT RATIO].
AUDIO: [SAMPLING RATE] (sampling frequency of
recorded sound) and [BITS PER SAMPLE]
(digitized bit[s] of recorded sound).
USER CLIP NAME:
Displays the clip name specified by the user.*
1
ACCESS: Displays [CREATOR] (person who recorded the
clip), [CREATION DATE] (date when the clip was
recorded), [LAST UPDATE DATE
] (date of the
latest update of the clip) and [LAST UPDATE
PERSON] (person who made the latest update of
the clip).
DEVICE: Displays [MANUFACTURER] (name of the device
manufacturer), [SERIAL NO.] (serial number of
the device) and [MODEL NAME] (model name of
the device).
SHOOT: Displays [SHOOTER
] (name of the person who
shot the video), [START DATE] (start date of
shooting), [END DATE] (end date of shooting),
and [LOCATION] ALTITUDE/LONGITUDE/
LATITUDE/SOURCE/PLACE NAME
(altitude,
longitude, latitude, and source of the information
and name of the location).
SCENARIO*
2
:
Displays [PROGRAM NAME
], [SCENE NO.], and
[TAKE NO.
].
NEWS: Displays [REPORTER
] (name of the reporter),
[PURPOSE
] (purpose of shooting), and
[OBJECT
] (object of shooting).
MEMO*
3
: Displays [OFFSET] (location of the frame where
the text memo is added), [PERSON
] (person who
recorded the text memo added to the clip) and
[TEXT
] (contents of the text memo). The AJ-
SPC700P can record one text memo per clip.
*1 The USER CLIP NAME recording method is
selectable.
*2 Be sure to enter PROGRAM NAME when entering
SCENARIO. It is not possible to record only the
SCENE NO or TAKE NO.
*3 Be sure to enter TEXT when entering MEMO. It is not
possible to record only PERSON or OFFSET.
<Note>
The AJ-SPC700P only displays printable ASCII
characters.
To set whether or not the uploaded metadata is
recorded
Set ON/OFF by selecting META DATA RECORD from the
menu bar.
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ