Panasonic KX-HCM280 Digital Camera User Manual


 
Operating Instructions
10
1.1.2 System Requirements
The PC (Personal Computer) and the network must meet the following technical
specifications for Network Camera to work properly.
*
1
Network Camera image is not displayed correctly in the Netscape
®
v6.x.
Use Netscape Navigator v4.7x.
Refer to Panasonic Network Camera Site
http://www.panasonic.com/netcam for the latest information on the web
browser.
Note
Pentium
®
II 300 MHz or greater CPU is recommended to prevent performance
degradation.
The display color quality
To insure the images you are viewing are the best they can be, set the Display
property setting (color quality) to 24 bit or higher. Follow the next steps.
1. Close all applications so that you are looking at the Windows desktop.
2. Right-click an open portion of the desktop.
3. Select [Properties], [Setting] tab, and set [Color Quality] (Colors/Color Pallet)
to the highest selection possible.
Note
Optimum video viewing will be seen when the color quality is set to 24bit or
higher. This change should not cause any problems with other applications on
your PC.
Item Description
Operating
System
Microsoft
®
Windows
®
95, Microsoft Windows 98/SE
Microsoft Windows 2000, Microsoft Windows Me
Microsoft Windows NT
®
4.0, Microsoft Windows XP
Network
Protocol
TCP/IP network protocol installed.
(HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
Interface 10/100 Mbps Ethernet
®
card for your network connection
Web browser*
1
Internet Explorer 5.0 or later/Netscape Navigator
®
4.7x.
(Not included on the Setup CD-ROM).