Filter
Top Products
Operating Instructions
58
(9) Multi-Camera The Multi-Camera screen needs to set up these
parameters. Enter the Camera Names and IP
addresses of each Network Camera. The Multi-
Camera can display up to four images in a window.
Refer to page 87.
(10) External Output
Control
Sets the External Device Control Output setting to
attach external sensors/devices. (Open or Short to
GND) Refer to page 89 and page 103.
(11) Indicator Control Sets Indicator operation. Indicator will be turned on
in the default. Refer to page 90.
(12) Status Displays general information of Network Camera.
Refer to page 91.
(13) Restart Restarts Network Camera retaining any settings you
entered. If any operational issues are changed, try
this option first. Refer to page 92.
(14) Update Firmware Updates the program to operate Network Camera
on the latest version of the system. Refer to page 93.
(15) Reset to Factory
Default
Initializes all the parameters to the factory default.
Note that all customer-applied settings will be lost,
requiring you to reconfigure Network Camera. Refer
to page 96.
(16) Help Provides you with detailed instructions of the terms
and functions of Network Camera.
Item Description