Filter
Top Products
Operating Instructions
[For assistance, please call: 1-800-272-7033] 85
Instructions for the data fields
White Balance Notes
• The wrong White Balance setting will cause Network
Camera to display colors improperly. In most cases Auto is
suggested.
• White Balance is also registered in preset programming.
Power Line
Frequency
It can select Flicker Correction by power line frequency.
• 60 Hz (default) • 50 Hz
Select 60 Hz in the United States.
Brightness
Control
Brightness Control can be locked.
Locked appears on the operation bar on page 42 when clicking.
Pan/Tilt/
Preset Control
Pan/Tilt/Preset Control can be locked. Pan/Tilt/Preset Control
also disables Click to Center operation.
Locked appears on the operation bar on page 42 when clicking.
Preset
Program
Control
Preset Program Control can be locked.
Program button disappears on the operation bar on page 42.
Zoom Control Zoom Control can be locked.
Locked appears on the operation bar on page 42 when clicking.
Focus Control Focus Control can be locked.
Locked appears on the operation bar on page 42 when clicking.
Pan Range Pan Range can be selected. Refer to page 86 on specifying the
Pan/Tilt range.
Right/Left End appears on the operation bar on page 42 when
having reached the selected end.
Tilt Range [On the table] or [on the ceiling] can be selected. Tilt Range can
be selected. Refer to page 86 on specifying the Pan/Tilt range.
Up/Down End appears on the operation bar on page 42 when
having reached the selected end.