Filter
Top Products
Operating Instructions
98
4.1 Mounting
Two ways of mounting are shown in the following figures. MAC Address and Serial
Number are indicated on the bottom label of the main unit of Network Camera.
Record both of them on the Network Camera Memo on page 3. They are
indispensable for setting network parameters after mounting Network Camera and
for future customer servicing.
Notes
• Mounting and cabling instructions described in this Operating Instructions
follow generally accepted guidelines suitable for residential installations. In
some areas, commercial and industrial installations are regulated by local
or state ordinances. For such installations, contact your local building
department or building inspector for more details.
• Network Camera is intended for indoor use only. Prolonged exposureto
direct sunlight or halogen light may damage CCD.
4.1.1 Mounting on the Table
Mount Network Camera at an even place where vibrations etc. are few.
Note
Network Camera is available between 15° based on level line for mounting on
the ceiling.