Filter
Top Products
Operating Instructions
62
Static
• IP Address
• Subnet Mask
• Check [Static] when having specified IP address
assigned to Network Camera from your ISP or
administrator. Enter the specified IP address and Subnet
Mask.
• If you use Network Camera on the LAN, set up in the
same class as your PC is in.
Refer to page 25 for the class.
• Refer to page 105 for the IP addressing.
DHCP
•Host Name
• Check [DHCP] (Dynamic Host Configuration Protocol),
when your ISP uses the DHCP server function which
assigns an IP address to Network Camera
automatically. Enter the Host name. Follow the
instructions of your ISP or administrator for the Host
name.
• Refer to unavailable character set 1 in page 105 for the
Host name.
Connection Type • Use [Auto Negotiation] normally.
• When you cannot access Network Camera, refer to
page 120.
Default Gateway*
a
• If you have the specified Default Gateway address from
your ISP or administrator, enter it in this data field.
• Refer to page 105 for the IP addressing.
DNS Server*
a
• Set DNS server address when you use Host Name to
register Network Camera on Multi-Camera window on
page 87.
• If you have the specified DNS server address from your
ISP or administrator, enter it in this data field. You can
set up two DNS server addresses.
• Refer to page 105 for the IP addressing.
Instructions for the data fields