Filter
Top Products
12
For assistance, please call : 1-800-272-7033.
Power Supply
WARNING! Do not dispose of Battery in fire, put in backwards, disassemble, or short
circuit; otherwise it may leak or burst, causing possible personal injury.
1While pressing the Lock Button, slide
the Battery Compartment lid in the
direction of the arrow and swing it
open.
2Install four Alkaline Batteries.
• Be sure to use Alkaline Batteries.
Never use manganese batteries.
• Make sure that the positive (+) and (-)
ends of the batteries are facing the
correct direction.
3Swing the Battery Compartment lid
down and slide it shut.
[ Bottom View ]
Power Supply
Safety precautions:
• Do not mix old and new batteries.
• Do not mix alkaline with manganese
batteries.
• Do not get the AA alkaline batteries near,
or dispose of in fire.
• Do not directly connect (short circuit) the
positive (+) and negative (–) terminals.
• Never attempt to disassemble or
reassemble the Battery.
• Do not drop or jar the Battery.
Note
• Instead of the supplied Alkaline batteries,
you can also use AA type Ni-Cd (high
density type) or nickel Metal-hydride
batteries available on the market.
• If you are not going to use the Digital
Camera for an extended period of time,
remove the batteries from the Digital
Camera.
When using the supplied Panasonic
alkaline batteries, you will have a maximum
of about 120 images* (at an ambient
temperature of 25° C).
* Conditions :
• Using the Panasonic Alkaline batteries.
• Capturing an image every 30 seconds.
• Using Flash once for every other capture.
• Recording mode is Fine.
Loading the Alkaline Batteries
Battery Notes Operation Time
Lock Button
Slide all the way
to the end.
• When loading or unloading Batteries, be
sure to slide the Battery Compartment lid
all the way to the end before opening. If
the lid is not slid to the end, Battery
Loading and Unloading may be
impossible.
Note
3000.P12-14.p65 00/09/25, 10:3712