Filter
Top Products
25
Basic Operation
Basic Operation
1Press MODE repeatedly to set display
mode to normal screen.
2Press (+) or (-) repeatedly,
[
(+) for ascending order, and (-)
for descending order] to change the
displayed image on the LCD
Viewfinder.
• The image page number and
recording mode are displayed at the
bottom of the screen.
• If there are no images in memory,
a blue back screen will be displayed.
• The image with audio is played back
when SHUTTER is pressed.
3Hold down (+) or (-), [ (+) for
ascending order, and
(-) for
descending order] to change the
displayed image on the LCD
Viewfinder by fast page advance.
• Page number is changed
continuously while
(+) or (-) is
held down.
• Selected page is displayed when
button is released.
Manual Playback
• A Still image with audio will be played.
The audio volume can be adjusted by
pressing VOL
/ .
• Turn off the LCD monitor when not in use
by pressing the DISPLAY twice. To turn
the monitor back on, press the DISPLAY
again.
• Pressing DISPLAY with LCD OFF turns
LCD ON and displays the menu. How-
ever, after selecting settings and exiting
the menu, the LCD will stay ON.
• Power shuts off if there is no activity over
2 minutes with Battery as a power source
to conserve power. Press SHUTTER to
turn POWER back.
You can playback recorded images on the
LCD Viewfinder.
• For images recorded with audio, a
is
displayed on the screen and audio is
played back when SHUTTER is pressed.
Before you begin
Set the POWER Switch to
(PLAY). (See page 16.)
[ With AUDIO ]
[ Without AUDIO ]
POWER Switch
1MODE Button
2, 3
Select Button /
LCD Viewfinder
Note
Playing Back Captured Images
Playing Back Captured Images
VOL /
Button
3000.P25-27.p65 00/09/25, 10:4025